Welcome to the website of Baoding Jiayun Conveyor Equipment Manufacturing Co., Ltd!
Wavy-Sided Conveyor Belt
- Product Description
-
Details
Uses
Due to space constraints or the need to lift materials at steep angles, side-wall conveyor belts must be capable of withstanding the extremely high stresses and repeated bending that occur during high-capacity, steep-angle material conveyance—without causing material spillage. To achieve this, these belts are constructed using high-quality polyester fabrics with very low elongation, ensuring superior rigidity. This product is ideally suited for conveying materials under conditions involving large inclinations—from 0° to 90°.
Features
• When conveying materials, large inclinations of up to 90° can be achieved.
• Large conveying capacity with no material spillage. It can smoothly transition and convey materials from horizontal to inclined positions, and vice versa.
Standard Specifications
Type Tensile strength N/mm Types Skeleton layer count Thickness of Coated Steam Gel (mm) Weight per meter (kg/m) 2) Smaller roller diameter mm XE 200 Ordinary 2 2x2 9.8 200 XOE 315 Ordinary
Heat-resistant
Flame-retardant
2+1 4x2 11.3 315 500 3 + 1 4x2 13.2 400 630 4+1 4x2 14.9 500 800 5 + 1 4x2 17.8 630 1000 6 + 1 5x3 22.0 800 XUE 315 Ordinary 2+1 4x3 12.7 315 500 3 + 1 4x3 14.5 400 630 4+1 4x3 16.3 500 XDE 315 Ordinary 2 + 2 4x3 13.7 315 500 3 + 2 4x3 15.5 400 630 4 + 2 4x3 17.3 500 Wavy skirt hem
The skirt hem is made from high-quality rubber.
It can also come in two types: pure rubber (BG) and rubber with a fabric-reinforced layer (BGT).
Conveying applications Height Skirt hem width Bottom width Weight Smaller roller diameter mm mm mm mm mm N 80 44 50 1.6 200 100 44 50 1.8 250 S 120 66 75 3.1 320 160 66 75 4.1 400 200 66 75 5.1 500 240 66 75 6.1 550 ES 300 88 100 12.0 700 400 88 100 16.0 900 Note: N - Light load; S - Medium load; ES - Heavy load.
Diaphragm
The transverse diaphragm is made from high-quality rubber and features highly elastic support.
It can also come in two types: pure rubber, or rubber with a fabric-reinforced layer.
T 
Type T75 T110 Height (mm) 75 110 Weight (kg/m) 1.65 2.20 Smaller roller diameter (mm) 200 300 TC 
Type TC110 TC140 TC180 TC220 TC260 Height (mm) 110 140 180 220 260 Weight (kg/m) 2.6 5.5 7.0 8.0 10.2 Smaller roller diameter (mm) 350 370 450 500 600 TCS 
Type TCS280 TCS360 Height (mm) 280 360 Weight (kg/m) 18.5 22.0 Smaller roller diameter (mm) 700 700 Quality/Grade Standard Performance Parameters for Covering Adhesive
China GB/T7984-2013 GB/T 32457-2015 Performance of Coatings on Adhesive Tapes Type Tensile Strength (ISO 37)
MpaElongation at Break (ISO 37)
%Wear (ISO 4649)
mm 3H 24 450 120 D 18 400 100 L 15 350 200 German standard DIN-22102 Level Tensile strength ≥ MPa Tensile elongation ≥ M% Wear amount ≥ mm 3 Bond strength between fabric layers (N/mm) Adhesive strength between the cover layer and fabric layer (/mm) Cover layer thickness: 0.8–1.5 mm Coating thickness > 1.5 mm W 18 400 90 ≥5 3.5 4.5 X 25 450 120 Y 20 400 150 Z 15 350 250 British Standard BS 490 Level Tensile strength ≥ MPa Tensile elongation ≥ M% Wear amount ≥ mm 3 Bond strength between fabric layers (N/mm) Adhesive strength between the cover layer and fabric layer (/mm) Cover layer thickness: 0.8–1.5 mm Coating thickness > 1.5 mm M 24 450 - ≥5.25 3.15 4.5 N 17 400 - Australian Standard AS 1332-2000 Level Tensile strength ≥ MPa Tensile elongation ≥ M% Wear amount ≥ mm 3 Bond strength between fabric layers (N/mm) Adhesive strength between the cover layer and fabric layer (/mm) Cover layer thickness: 0.8–1.5 mm Coating thickness > 1.5 mm A 17 400 70 6 4 4.8 E 14 300 - F 14 300 - M 24 450 125 N 17 400 200 S 14 300 250 S* 12 300 250 South Africa SANS 1173:2005 Level Tensile strength ≥ MPa Tensile elongation ≥ M% Wear amount ≥ mm 3 Bond strength between fabric layers (N/mm) Adhesive strength between the cover layer and fabric layer (N/mm) A 18 400 90 ≥7 ≥5 X 25 450 120 M 24 450 150 N 20 400 250 Specifications and Technical Parameters of Wavy-Edged Multi-Layer Fabric-Cored Conveyor Belts
Fabric type Fabric Construction Fabric Model Tape thickness (mm/p) Strength Series (N/mm) Coating Film Thickness Width range (mm) Through Latitude 2nd floor 3rd floor 4th floor 5th floor 6th floor Upper cover layer Lower cover layer Nylon
EP Polyester
NN
EE
Cotton nylon Cotton nylon Nylon/EP Polyester/NN/EE-100 1.00 200 300 400 500 600 0-12 0-10 300–2500 Nylon/EP Polyester/NN/EE-125 1.05 250 375 500 625 750 Nylon/EP Polyester/NN/EE-150 1.10 300 450 600 750 900 Nylon/EP Polyester/NN/EE-200 1.20 400 600 800 1000 1200 Nylon/EP Polyester/NN/EE-250 1.40 500 750 1000 1250 1500 Nylon/EP Polyester/NN/EE-300 1.60 600 900 1200 1500 1800 Adhesion strength and elongation performance meet the requirements outlined in the table below.
Adhesion strength, elongation performance Core material Bonding strength Extended Performance Layer-to-layer N/mm N/mm between the cover layer and the fabric layer Total-Thickness Longitudinal Tensile Elongation Full-Thickness Longitudinal Reference Force Elongation Rate Coating thickness ≤ 1.5 mm Cover layer thickness ≥ 1.5 mm Polyester canvas ≥5 ≥4.5 ≥5 ≥10% ≤4%6 The adhesive tape's coverage performance meets the specifications in the following table.
China GB/T 7984-2013 GB/T 32457-2015 Performance of Tape Coatings Performance of Tape Coatings Overlay Layer Level Tensile strength Tensile Elongation at Break Wear amount Changes in tensile strength and elongation at break after aging Mpa Kgf/cm2 % mm 3 % H ≥24 ≥240 ≥450 ≤120 -25 to +25 D ≥18 180 ≥400 ≤100 -25 to +25 L ≥15 150 ≥350 ≤200 -25 to +25
About Us
Baoding Jiayun Conveyor Equipment Manufacturing Co., Ltd. is a professional enterprise producing various conveyor belts, conveying machinery, and accessories. The company is based in the domestic market and closely follows international standards. The ordinary type, high-temperature resistant, and full-core flame-retardant conveyor belts produced by the company, with their good product quality and thoughtful after-sales service, are sold throughout the country and exported in large quantities to Southeast Asian countries. Products are widely used in coal, metallurgy, ports, power, building materials, and other production fields.
Advanced equipment, modern management, and high-quality raw materials.
We have a professional R&D team and engineers to create innovative solutions for the needs of our business partners.
We have many years of export experience, with products sold to more than 30 countries.
FAQ
Can you accept small quantities?
Yes, small batches are accepted, and delivery is fast
Do you have a pre-shipment inspection procedure?
Yes, we always test the product before delivery.
Can I take a sample for testing?
Yes, samples can be sent for testing before bulk orders.
What is the delivery time?
Inventory orders take 7-15 days, while OEM and ODM orders depend on the specific circumstances.
What are the payment terms?
Wire transfer, letter of credit, Western Union, Alipay, etc.
Can I have my own customized product?
Yes. OEM and ODM services are available, including design, logo, and packaging.
Keywords:
Online Inquiry
Note: Please leave your email address, and our professionals will contact you as soon as possible!
Related Products
Zhangyue Village, West of the Village, Boye County, Baoding City, Hebei Province
WeChat QR Code
Get a Quote Now